19-4793; Rev 2; 11/03
Low-Voltage, Quad, SPST CMOS Analog Switches
General Description____________________________Features
The MAX4610/MAX4611/MAX4612 are quad, low-volt-age, single-pole/single-throw (SPST) analog switches. oOffered in Automotive Temperature Range(-40°C to +125°C)
On-resistance (100Ω, max) is matched between switch-es to 4Ω, max and is flat (4Ω, max) over the specifiedoGuaranteed On-Resistance
signal range. Each switch handles V+ to GND analog100Ωmax (5V Supply)signal levels. Maximum off-leakage current is only 1nA46Ωmax (12V Supply)
at TA= +25°C and 2nA at TA= +85°C.
oGuaranteed Match Between Channels (4Ω, max)The MAX4610 has four normally open (NO) switches,oGuaranteed Flatness Over Signal Range (18Ω, max)and the MAX4611 has four normally closed (NC)oOff-Leakage Current Over Temperature switches. The MAX4612 has two NO switches and two<2nA at TA= +85°C
NC switches. These CMOS switches operate from ao>2kV ESD Protection per Method 3015.7single +2V to +12V supply. All digital inputs have +0.8Vand +2.4V logic thresholds, ensuring TTL/CMOS-logicoRail-to-Rail®Signal Handlingcompatibility when using a single +5V supply.
oTTL/CMOS-Logic Compatible
Ordering Information________________________Applications
PARTTEMP RANGEPIN-PACKAGEBattery-Operated EquipmentMAX4610CUD0°C to +70°C14 TSSOPMAX4610CSD0°C to +70°C14 Narrow SOAudio/Video Signal Routing
MAX4610CPD0°C to +70°C14 Plastic DIPLow-Voltage Data-Acquisition SystemsMAX4610C/D0°C to +70°CDice*Sample-and-Hold CircuitsMAX4610EGE-40°C to +85°C16 QFNCommunication Circuits
MAX4610EUD-40°C to +85°C14 TSSOPMAX4610ESD-40°C to +85°C14 Narrow SOMAX4610EPD-40°C to +125°C14 Plastic DIPOrdering Information continued at end of data sheet.*Contact factory for dice specifications.
Pin Configurations/Truth Tables
V+N.C.IN1IN4MAX461016151413TOP VIEWNO1114V+NO1112N.C.COM1213IN1NO2312IN4INPUTSWITCH STATELOWOFFCOM1211NO4COM2411NO4HIGHONMAX4610IN2510COM4NO2310COM4IN369COM3COM249COM3GND78NO3TSSOP/SO/DIP5678IN2IN3GNDNO3MAX4611/MAX4612 Pin Configurations/Truth Tables appear at end of data sheet.QFNRail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
________________________________________________________________Maxim Integrated Products1
For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at 1-888-629-42, or visit Maxim’s website at www.maxim-ic.com.
MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX4612ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND)
V+...........................................................................-0.3V to +13VIN_, COM_, NO_, NC_ (Note 1)....................-0.3V to (V + +0.3V)Continuous Current (any terminal)
(pulsed at 1ms, 10% duty cycle).....................................20mAPeak Current (any terminal)
(pulsed at 1ms, 10% duty cycle).....................................40mAESD per Method 3015.7.......................................................>2kV
Continuous Power Dissipation (TA= +70°C)
14-Pin TSSOP (derate 6.3mW/°C above +70°C)..........500mW14-Pin Narrow SO (derate 8.00mW/°C above +70°C)..0mW14-Pin Plastic DIP (derate 10.00mW/°C above +70°C)..800mW16-Pin QFN (derate 18.5mW/°C above +70°C)..........1481mWOperating Temperature Ranges
MAX461_C_ _......................................................0°C to +70°CMAX461_E_ _....................................................-40°C to +85°CMAX461_A_ _.................................................-40°C to +125°CStorage Temperature Range.............................-65°C to +160°CLead Temperature (soldering, 10s).................................+300°C
Note 1:Signals on NO_, NC_, COM_, or IN_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to
maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functionaloperation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure toabsolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +5V ±10%, VIN_H= 2.4V, VIN_L= 0.8V, TA= TMINto TMAX, unless otherwise noted.)
PARAMETERANALOG SWITCHAnalog Signal Range(Note 3)VCOM_,VNO_,VNC_RONV+ = 4.5V,ICOM_= 1mA,VNO_= VNC_= 3VV+ = 4.5V,ICOM_= 1mA,VNO_= VNC_= 3VV+ = 4.5V;ICOM_= 1mA;VNO_= VNC_= 3V, 2V, 1VV+ = 5.5V;VCOM_= 1V, 4.5V;VNO= 4.5V, 1VTA= +25°CTA= TMINto TMAXTA= +25°CTA= TMINto TMAXTA= +25°CTA= TMINto TMAXTA= +25°CTA= -40°C to +85°CTA= -40°C to +125°CTA= +25°CTA= -40°C to +85°CTA= -40°C to +125°C-0.1-2-30-0.1-2-30-0.2-4-30121.0070V+1001504818Ω250.12300.12300.2430nAnAnAΩΩVSYMBOLCONDITIONSMINTYP(Note 2)MAXUNITSOn-ResistanceOn-Resistance MatchBetween Channels (Note 4)∆RONOn-Resistance Flatness (Note 5)RFLAT(ON)NO or NC Off-LeakageCurrent (Note 6)INO(OFF)COM Off-Leakage Current(Note 6)ICOM(OFF)V+ = 5.5V;VCOM_= 1V, 4.5V;VNO_= VNC_= 4.5V, 1VCOM On-Leakage Current(Note 6)ICOM(ON)TA= +25°CV+ = 5.5V;VCOM= 1V, 4.5V;TA= -40°C to +85°CVNO_= VNC_= 1V, 4.5V, or floatingTA= -40°C to +125°C2_______________________________________________________________________________________元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog Switches
ELECTRICAL CHARACTERISTICS—Single +5V Supply (continued)
(V+ = +5V ±10%, VIN_H= 2.4V, VIN_L= 0.8V, TA= TMINto TMAX, unless otherwise noted.)
PARAMETERSYMBOLCONDITIONSMINTYPMAX(Note 2)UNITSLOGIC INPUTInput Current with InputVoltage HighIIN_HVIN_= 2.4V, all others = 0.8V-0.10.0010.1µAInput Current with InputVoltage LowIIN_LVIN_= 0.8V, all others = 2.4V-0.10.0010.1µAInput High VoltageVIN_H2.41.5VInput Low VoltageVIN_L1.40.8VDYNAMIC (Note 3)Turn-On TimetONVCOM_= 3V, Figure 2TA= +25°C3560TA= TMINto TMAX80nsTurn-Off TimetOFFVCOM_= 3V, Figure 2TA= +25°C1520TA= TMINto TMAX30nsOn-Channel BandwidthBWSignal = 0dBm, Figure 4,50Ωin and outTA= +25°C300MHzCharge InjectionVCTECL= 1.0nF, VGEN= 0,RGEN= 0, Figure 3TA= +25°C15pCOff-Isolation (Note 7)VISORL= 50Ω, CL= 5pF,f = 1MHz, Figure 4TA= +25°C-60dBCrosstalk (Note 8)VCTRL= 50Ω, CL= 5pF,f = 1MHz, Figure 5TA= +25°C-80dBNO_ or NC_ CapacitanceC(OFF)f = 1MHz, Figure 6TA= +25°C16pFCOM_ Off-CapacitanceCCOM(OFF)f = 1MHz, Figure 6TA= +25°C16pFCOM_On-CapacitanceCCOM(ON)f = 1MHz, Figure 6TA= +25°C23pFTotal HarmonicDistortionTHD600ΩIN and OUT,20Hz to 20kHz, 2Vp-pTA= +25°C0.009%SUPPLYPower-Supply Range212VSupply CurrentI+VIN= 0 or V+,all switches on or off-10.0011µA_______________________________________________________________________________________3
MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX4612ELECTRICAL CHARACTERISTICS—Single +3V Supply
(V+ = +3V, VIN_H= 2.4V, VIN_L= 0.5V, TA= TMINto TMAX, unless otherwise noted.)
PARAMETERANALOG SWITCHAnalog Signal Range(Note 3)VCOM_,VNO_,VNC_RONV+ = 2.7V,ICOM_= 1mA,VNO_= VNC_= 1VV+ = 2.7V,ICOM_= 1mA,VNO_= VNC_= 1VV+ = 3.6V,VCOM_= 0.5V, 3V;VNO_= VNC_= 3V,0.5VV+ = 3.6V,VCOM_= 0.5V, 3V;VNO_= VNC_= 3V,0.5VV+ = 3.6V,VCOM_= 0.5V, 3V;VNO_= VNC_= 0.5V,3V, or floatingTA= +25°CTA= TMINto TMAXTA= +25°CTA= TMINto TMAXTA= +25°CTA= -40°C to + 85°CTA= -40°C to + 125°CTA=+25°CTA= -40°C to + 85°CTA= -40°C to + 125°CTA= +25°CTA= -40°C to +85°CTA= -40°C to +125°C-0.1-2-30-0.1-2-30-0.2-4-302.41.01.0TA= +25°CTA= -40°C to +85°CTA= -40°C to +125°CTA= +25°CTA= TMINto TMAX30500.5901201404560nsns20V+VSYMBOLCONDITIONSMINTYP(Note 2)MAXUNITS1753604505100.12300.12300.2430VVnAnAnAΩΩOn-ResistanceOn-Resistance MatchBetween Channels (Note 4)∆RONNO_ or NC_ Off-LeakageCurrent (Notes 3, 6)INO(OFF)COM_ Off-Leakage Current(Notes 3, 6)ICOM(OFF)COM_On-Leakage Current(Notes 3, 6)LOGIC INPUTSInput High VoltageInput Low VoltageDYNAMIC(Note 3)Turn-On TimeICOM(ON)VIN_HVIN_LtONVCOM_= 1.5V,Figure 2VCOM_= 1.5V,Figure 2Turn-Off TimetOFF4_______________________________________________________________________________________
元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog Switches
ELECTRICAL CHARACTERISTICS—Single +12V Supply
(V+ = +12V, VIN_H= 4V, VIN_L= 0.8V, TA= TMINto TMAX, unless otherwise noted.)
PARAMETERSYMBOLCONDITIONSMINTYPMAX(Note 2)UNITSANALOG SWITCHAnalog Signal RangeVCOMV_,(Note 3)NO0V+VV_,NC_,V+ = 12V,On-ResistanceR45ONITA= +25°C30COM= 2mA,VNO_= VNC_= 10VTA= TMINto TMAX60ΩLOGIC INPUTSInput High VoltageVIN_H4.02.8VInput Low VoltageVIN_L2.50.8VSUPPLYPositive Supply CurrentI+VIN_= 0 or V+, all switches on or off-10.0011µANote 2:The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Note 3:Guaranteed by design.
Note 4:∆RON= RON(max) - RON(min).
Note 5:Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
Note 6:Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25°C.Note 7:Off-Isolation = 20log10(VCOM_/ VNO_), VCOM_= output, VNO_= input to off switch.Note 8:Between any two switches.
_______________________________________________________________________________________5
MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX4612__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
ON-RESISTANCE
vs. VCOM AND TEMPERATURE
V+ = +5VMAX4610 toc02MAX4610-1BON-RESISTANCE vs. VCOM
MAX4610-1AON-RESISTANCE vs. VCOM
400350300RON (Ω)250200150
V+ = +3V40
V+ = +5V30
0
1
2
3VCOM (V)
4
5
6
0
RON (Ω)V+ = +2V9080
807060RON (Ω)50403020
0
V+ = +12V2
4
6VCOM (V)
8
10
V+ = +9VV+ = +5VTA = +85°C706050
TA = -40°CTA = +25°C10050
12
0.51.01.52.02.53.03.54.04.55.0
VCOM (V)
OFF-LEAKAGE vs. TEMPERATURE
MAX4610-03ON-LEAKAGE vs. TEMPERATURE
MAX4610-04SUPPLY CURRENT vs. TEMPERATURE
V+ = +5V1
MAX4610-05100
V+ = +5VVCOM_ = 0VNO_ OR VNC_ = +4.5VOFF-LEAKAGE (pA)10
1000100ON-LEAKAGE (pA)V+ = +5VVCOM_ = 0VNO_ OR VNC_ = FLOATING10
10
I+ (pA)0.1
1
1
0.1
0.1
-40
-20
0
20
40
60
80
100
TEMPERATURE (°C)
0.01
-40
-20
0
20
40
60
80
100
TEMPERATURE (°C)
0.01
0.001
-40
-20
0
20
40
60
80
100
TEMPERATURE (°C)
CHARGE INJECTION vs. VCOM
MAX4610 toc06FREQUENCY RESPONSE
0-10-20-30GAIN (dB)-40-50-60-70-80
OFF-ISOLATIONPHASEMAX4610 toc07TOTAL HARMONIC DISTORTION PLUS NOISE
vs. FREQUENCY
14410872
THD + N (%)360-36-72-108-1440.1
V+ = +2V, 1Vp-p SIGNAL600Ω IN AND OUTMAX4610-0865CHARGE INJECTION (pC)43
V+ = +12V210-1
0
2
4
6VCOM_ (V)
8
10
V+ = +5VLOSS1801
0.01
V+ = +3V, 1Vp-p SIGNALV+ = +5V, 2Vp-p SIGNAL-90-100
12
1k
10k
100k
1M
10M
FREQUENCY (Hz)
-180100M500M
0.001
10
100
1k
10k
100k
1M
FREQUENCY (Hz)
6_______________________________________________________________________________________
元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog Switches
Pin Description
PINMAX4610MAX4611MAX4612NAMEFUNCTIONTSSOP/SO/ DIPQFNTSSOP/SO/DIPQFNTSSOP/SO/DIPQFN1, 3, 8, 111, 3,Analog Switch Normally Open8, 11————NO1–NO4Terminals——1, 3, 8, 111, 3,Analog Switch Normally Closed8, 11——NC1–NC4Terminals————1, 81, 8NO1, NO3Analog Switch Normally OpenTerminals————3, 113, 11NC2, NC4Analog Switch Normally ClosedTerminals2, 4, 9, 102, 4,2, 4,2, 4,9, 102, 4, 9, 109, 102, 4, 9, 109, 10COM1–COM4Analog Switch CommonTerminals13, 5, 6, 1214, 5,14, 5,14, 5,6, 1313, 5, 6, 126, 1313, 5, 6, 126, 13IN1–IN4Logic-Control Digital Input777777GNDGround. Connect to digitalground.—12, 15—12, 15—12, 15N.C.No Connection. Not internallyconnected.Positive Analog and Digital-141614161416V+Supply Voltage Input. Internallyconnected to substrate.Applications Information
POSITIVE SUPPLYPower-Supply Sequencingand Overvoltage Protection
V+MAX4610Do not exceed the absolute maximum ratings, becauseMAX4611stresses beyond the listed ratings may cause perma-MAX4612nent damage to the devices.
Proper power-supply sequencing is recommended forNO_COM_all CMOS devices. Always apply V+ before applyinganalog signals or logic inputs, especially if the analogVgor logic signals are not current limited. If this sequenc-ing is not possible, and if the analog or logic inputs arenot current limited to 20mA, add a small-signal diode(D1) as shown in Figure 1. If the analog signal can dipbelow GND, add D2. Adding protection diodesFigure 1. Overvoltage Protection Using Two External Blockingreduces the analog signal range to a diode drop (aboutDiodes0.7V) below V+ (for D1), and to a diode drop aboveground (for D2). Leakage is unaffected by adding thebe significant when low supply voltages (+5V or less)diodes. On-resistance increases by a small amount atare used. With a +5V supply, TTL compatibility is notlow supply voltages. Maximum supply voltage (V+)guaranteed when protection diodes are added. Drivingmust not exceed 13V.
IN1 and IN2 all the way to the supply rails (i.e., to adiode drop higher than the V+ pin, or to a diode dropAdding protection diodes causes the logic thresholdslower than the GND pin) is always acceptable.
to be shifted relative to the power-supply rails. This can
_______________________________________________________________________________________7
MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX4612Protection diodes D1 and D2 also protect against someovervoltage situations. With Figure 1’s circuit, if the sup-ply voltage is below the absolute maximum rating, andif a fault voltage up to the absolute maximum rating isapplied to an analog signal pin, no damage will result.
gle-supply operation with some precautions. Theabsolute maximum rating for V+ is +13.2V (referencedto GND). When operating near this region, bypass V+with a minimum 0.1µF capacitor to ground as close tothe IC as possible.
Caution: The absolute maximum V+ to V- differentialvoltage is 13.0V. Typical ±6V or 12V supplies with±10% tolerances can be as high as 13.2V.This volt-age can damage the MAX4610/MAX4611/MAX4612.Even ±5% tolerance supplies may have overshoot ornoise spikes that exceed 13.0V.
Operating Considerations for
High-Voltage Supply
The MAX4610/MAX4611/MAX4612 are pin-compatiblewith the industry-standard 74HC4066 and theMAX4066, and are optimized for +5V single-supplyoperation. The MAX4610 family is capable of +12V sin-
______________________________________________Test Circuits/Timing Diagrams
MAX4610MAX4611MAX4612VCOM_SWITCHINPUTV+V+SWITCHOUTPUTVOUTRL300ΩCL35pFVOUTSWITCHOUTPUT0tONLOGICINPUTVINH050%50%tR < 20nstF < 20nsCOM_NO_, NC_IN_LOGICINPUTGNDtOFF0.9 · V0UT0.9 · VOUTCL INCLUDES FIXTURE AND STRAY CAPACITANCE. RL VOUT = VCOM RL + RON()Figure 2. Switching Time
MAX4610MAX4611MAX4612RGENCOM_V+V+NO_, NC_CLGNDIN_ OFFONQ = (∆VOUT)(CL)VOUT ∆VOUTVOUT VGENINVINOFFFigure 3. Charge Injection8
_______________________________________________________________________________________
元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog Switches
Test Circuits/Timing Diagrams (continued)MAX461010nFV+MAX4610MAX461110nFV+MAX4611MAX4612MAX4612SIGNALGENERATOR 0dBmSIGNALCOM_V+GENERATOR 0dBmV+COM1NO150ΩVIN_L ORIN_ VIN_HVIN1IN2INL ORVINL ORVVINHANALYZERINHNO_, NC_NO2COM2GNDANALYZERRLRGNDLFigure 4. Off-Isolation/On-Channel BandwidthFigure 5. CrosstalkPARTTEMP RANGEPIN-PACKAGEMAX4610ASD0°C to +70°C-40°C to +125°CMAX4611CUD0°C to +70°C14 TSSOPMAX4611CSD0°C to +70°C14 Narrow SOMAX4611CPD0°C to +70°C14 Plastic DIP10nFV+MAX4610MAX4611MAX4611C/D0°C to +70°CDice*MAX4612MAX4611EGE-40°C to +85°C16 QFNMAX4611EUD-40°C to +85°C14 TSSOPCOM_V+MAX4611ESD-40°C to +85°C14 Narrow SOMAX4611EPD-40°C to +85°C14 Plastic DIPMAX4611AUD-40°C to +125°C14 TSSOPCAPACITANCEIN_ VINL ORMAX4611ASD-40°C to +125°C14 Narrow SOMETERVINHNO_, NC_MAX4612CUD0°C to +70°C14 TSSOPf = 1MHzMAX4612CSD0°C to +70°C14 Narrow SOGNDMAX4612CPD0°C to +70°C14 Plastic DIPMAX4612C/D0°C to +70°CDice*MAX4612EUD-40°C to +85°C14 TSSOPMAX4612ESD-40°C to +85°C14 Narrow SOFigure 6. Channel Off/On-Capacitance
MAX4612EGE-40°C to +85°C16 QFNMAX4612EPD-40°C to +85°C14 Plastic DIPMAX4612AUD-40°C to +125°C14 TSSOPMAX4612ASD-40°C to +125°C14 Narrow SO*Contact factory for dice specifications._______________________________________________________________________________________9
MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX4612Pin Configurations/Truth Tables (continued)V+N.C.IN114IN4TOP VIEWNC11COM12NC23COM24IN25IN36GND7MAX461114V+13IN112IN411NC410COM49COM38NC3INPUTLOWHIGHSWITCH STATEONOFF16NC1COM1NC2COM21215131211N.C.NC4COM4COM3MAX4611345IN2109TSSOP/SO/DIP6IN37GNDQFN8NC3V+N.C.IN114IN4TOP VIEWNO11COM12NO23COM24IN25IN36GND7MAX461214V+13IN112IN411NC410COM49COM38NC3INPUTLOWHIGHNO1, NO2OFFONNC3, NC4ONOFF16NO1COM1NC2COM21215131211N.C.NC4COM4COM3MAX4612345IN2109TSSOP/SO/DIP6IN37GNDQFN8NO310______________________________________________________________________________________
元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog Switches
___________________________________________________________Chip Topographies
MAX4610/MAX4611MAX4612 V+ IN1IN4 V+ IN1IN4NO1 (NC1)NO1COM1NO4(NC4)COM1NC4NO2 (NC2)COM4NO2COM4COM20.049\"COM20.049\"(1.24mm)(1.24mm)COM3COM3IN2IN3GNDNO3 (NC3)IN2IN3GNDNC30.054\"0.054\"(1.37mm)(1.37mm)( ) ARE FOR MAX4611TRANSISTOR COUNT: 132SUBSTRATE CONNECTED TO V+
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)
SPE.mm04.4POSST______________________________________________________________________________________11MAX4610/MAX4611/MAX4612元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog SwitchesMAX4610/MAX4611/MAX461Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)SOICN .EPSINCHESDIMAA1BCeEHLMAXMIN0.0530.0690.0040.0100.0140.0190.0070.0100.050 BSC0.1500.1570.2280.2440.0160.050MILLIMETERSMAXMIN1.751.350.250.100.490.350.190.251.27 BSC3.804.005.806.200.401.27NEHVARIATIONS:1INCHESMILLIMETERSMIN4.808.559.80MAX5.008.7510.00NMS0128AA14AB16ACTOP VIEWDIMDDDMIN0.10.3370.386MAX0.1970.3440.394DAeBA1LC0-8FRONT VIEWSIDE VIEWPROPRIETARY INFORMATIONTITLE:PACKAGE OUTLINE, .150\" SOICAPPROVALDOCUMENT CONTROL NO.REV.21-0041B1112______________________________________________________________________________________PDIPN.EPS元器件交易网www.cecb2b.com
Low-Voltage, Quad, SPST CMOS Analog Switches
MAX4610/MAX4611/MAX4612Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to www.maxim-ic.com/packages.)
32L QFN.EPSMaxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses areimplied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________13©2003 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
因篇幅问题不能全部显示，请点此查看更多更全内容