Laminating Machine
1. Max. mechanical speed: 90m/min
2. Dual Panasonic frequency converter3. Automatic tension controlleLaminating Machine Usage and FeatureThe machine is applied to laminating various roll materials, such as plastic film, paper, and aluminum foil, etc, in two-layer or multi-layer manner.This machine is the upgraded model of laminating machine GF-B our company produces. Structure of mechanical component is exactly the same with that of GF-B; advanced electrical appliance, such as dual-frequency converter and automatic tension controller, etc, controlling circuit by automation.
1. First unwinder, second unwinder and rewinder all adopt air-expansion shaft.
2.First unwinder is equipped with photoelectric correction device.
3. The film tension of first unwinder and second unwinder is controlled by automatic tension
controller.glue spreading.
4. Glue spreading by mesh roller; scraper imported from Switzerland; the scraper will oscillate when 5. Dual-frequency conversion adjusting speed technology; the machine is equipped with two Panasonic frequency converters, seperately controlling main motor and glue spreading
1
motor.
6. The entrance of oven is equipped with low friction pneumatic fluctuating roller to make film tension in the oven fully automatic controlled.
7. The inner of laminating hot-roller is heated by heat-conducting oil, uniform temperature and energy saving.
8. Glue spreading pressure roller and laminating pressure roller adopt pneumatic press-adding machanism, whose pressure can be regulated.
9. The total length of oven is 7.5m. The inner guiding rollers
are shaped in arch, driven by chain initiatively. 10. The oven is heated by electricity; it is devided into three sections of independent temperature control; the temperature in every section can be regulated
independently.
2
Detailed Product Description
Laminating Machine
1. Max. mechanical speed: 150m/min 2. Imported EPC correction system 3. Independent double-arm turret
Laminating Machine
Usage and Feature:
The machine is applied to laminating various roll materials, such as plastic film, paper, and aluminum foil, etc, in two-layer or multi-layer manner.
The feeding stander and discharging stander of this machine are both
independent dual-arm and dual-working position rotary turrets. The machine also adopts dual-photoelectric autotracking correction system, imported
photoeletric and hydraulic correcting system, automatic tension control system, pneumatic open-type oven, oven’s hot air circulatory system and so on, with the characteristic of low noise, low energy consumption, high laminating speed and little air pollution, etc.
1. First unwinder, second unwinder and rewinder all adopt independent dual-arm and dual-working position rotary turrets.
3
2. First unwinder, second unwinder and rewinder all adopt air-expansion
shaft.
3. First unwinder is equipped with photoelectric correction device.
4. The film tension of first unwinder, second unwinder and rewinder is controlled by automatic tension controller.
4
5. Glue spreading by mesh roller; scraper imported from Switzerland; the scraper will oscillate when glue spreading.
6. Dual-frequency conversion adjusting speed technology; the machine is equipped with two Panasonic frequency converters, seperately controlling main motor and glue spreading
motor.
7. The entrance of oven is equipped with low friction pneumatic fluctuating roller to make film tension in the oven fully automatic controlled.
5
8. The inner of laminating hot-roller is heated by heat-conducting oil, uniform temperature and energy saving.
9. Glue spreading pressure roller and laminating pressure roller adopt pneumatic press-adding machanism, whose pressure can be regulated.
10. Pneumatic open-type oven; the total length of oven is 8m; the inner guiding rollers are shaped in arch, driven by chain initiatively; there are walkway and guard rail at the side of the
6
oven.
11. The oven is devided into four sections of independent temperature
control; external electric heating system; the temperature in every section can be regulated
independently.
12. The inner of the oven is stainless steel and hot air circulation structured, which can save much
7
energy.
13. The air exhausting equipment in the entrance of the oven discharges high concentration gas which volatilizes in the beginning.
14. The exit of the oven is equipped with imported photoeletric and hydraulic correcting system.
15. All the aluminum guiding rollers are highly hardened and dynamic
8
balance processing.
High Speed Dry
Method Laminating Machine GF-G
Laminating Machine
9
1. Max. mechanical speed: 180m/min 2. YASKAWA frequency converter 3. Siemens PLC control system
Laminating Machine
Usage and Feature:
The machine is applied to laminating various roll materials, such as plastic film, paper, and aluminum foil, etc, in two-layer or multi-layer manner.
This machine adopts Siemens PLC control system, Japanese YASKAWA frequency converter, tension closed-loop control system, roller stable system, programmable control and man-machine interface, which reach an international advanced level.
1. The machine adopts Siemens PLC control system to realise the production process fully automatic controlling.
2. Seven frequency convertion control system; Japanese YASKAWA frequency
converter.
10
3. Man-machine interface displays and controls machine’s working state, speed, tension and other parameters.
4. First unwinder, second unwinder and rewinder all adopt air-expansion
shaft.
5. First unwinder is equipped with photoelectric correction device.
6. The film tension of first unwinder, second unwinder, the rewinder and the oven is fully auto closed-loop controlled. Tension is automatically tested and displayed when the machine is working.
7. Glue spreading by mesh roller; scraper imported from Switzerland; the scraper will oscillate when glue spreading.
8. The inner of laminating hot-roller is heated by heat-conducting oil, uniform temperature and energy saving.
9. Glue spreading pressure roller and laminating pressure roller adopt pneumatic press-adding machanism, whose pressure can be regulated.
11
10. Pneumatic open-type oven; the total length of oven is 8m; the inner guiding rollers are shaped in arch, driven by synchronous belt initiatively; there are walkway and guard rail at the side of the
oven.
11. The oven is devided into four sections of independent temperature controll; external electric heating system; the temperature in every section can be regulated
independently.
12. The inner of the oven is stainless steel and hot air circulation structured, which can save much
12
energy.
13. The air exhausting equipment in the entrance of the oven discharges high concentration gas which volatilizes in the beginning.
14. The exit of the oven is equipped with imported photoeletric and hydraulic correcting
system.
15. All the aluminum guiding rollers are highly hardened and dynamic balance
processing.
13
Laminating Machine
1. Max. mechanical speed: 180m/min 2. YASKAWA frequency converter 3. Siemens PLC control system
The machine is applied to laminating various roll materials, such as plastic film, paper, and aluminum foil, etc, in two-layer or multi-layer manner.
This machine adopts Siemens PLC control system, Japanese YASKAWA frequency converter, tension closed-loop control system, roller stable system, programmable control and man-machine interface, which reach an international advanced level.
1. The machine adopts Siemens PLC control system to realise the production process fully automatic controlling.
2. Seven frequency convertion control system; Japanese YASKAWA frequency
converter.3. Man-machine interface displays and controls machine’s working state,
speed, tension and other parameters.
4. First unwinder, second unwinder and rewinder all adopt air-expansion shaft.5. First unwinder is equipped with photoelectric correction device.
6. The film tension of first unwinder, second unwinder, the rewinder and the oven is fully auto closed-loop controlled. Tension is automatically tested and displayed when the machine is working. 7. Glue spreading by mesh roller; scraper imported from Switzerland; the scraper will oscillate when glue spreading. 8. The inner of laminating hot-roller is heated by heat-conducting oil, uniform temperature and energy saving. 9. Glue spreading pressure roller and laminating pressure roller adopt pneumatic press-adding machanism, whose pressure can be
regulated.10. Pneumatic open-type oven; the total length of oven is 8m; the inner
guiding rollers are shaped in arch, driven by synchronous belt initiatively; there are walkway and guard rail at the
14
side of the oven.11. The oven is devided into four sections of independent
temperature controll; external electric heating system; the temperature in every section can be regulated
independently.12. The inner of the oven is stainless steel and hot air circulation
structured, which can save much energy.entrance
of
the
oven
discharges
high
concentration
13. The air exhausting equipment in the gas
which
volatilizes
in
the
beginning.14. The exit of the oven is equipped with imported photoeletric and
hydraulic correcting system.15. All the aluminum guiding rollers are highly
hardened and dynamic balance processing.
15
Detailed Product Description
Laminating Machine
1. Max. mechanical speed: 90m/min 2. Panasonic frequency converter
3. Magnetic powder controls the tension
Laminating Machine
Usage and Feature:
The machine is applied to laminating various roll materials, such as plastic film, paper, and aluminum foil, etc, in two-layer or multi-layer manner.
1. First unwinder, second unwinder and rewinder all adopt air-expansion shaft.
2. First unwinder is equipped with photoelectric correction device.
3. The tension of first unwinder, second unwinder and rewinder is respectively controlled by its own magnetic powder clutch.
16
4. Glue spreading by mesh roller; scraper imported from Switzerland; the scraper will oscillate when glue spreading.
5. Main motor adopts frequency conversion adjusting speed, Panasonic frequency converter.
6. The inner of laminating hot-roller is heated by heat-conducting oil, uniform temperature and energy saving.
17
7. Glue spreading pressure roller and laminating pressure roller adopt pneumatic press-adding machanism, whose pressure can be regulated.
8. The total length of oven is 7.5m. The inner guiding rollers are shaped in arch, driven by chain initiatively.
9. The oven is heated by electricity; it is devided into three sections of independent temperature control; the temperature in every section can be regulated
independently.
18
Laminating Machine 1. Max. mechanical speed: 90m/min 2. Panasonic frequency converter 3. Magnetic powder controls the tension Laminating Machine Usage and Feature: The machine is applied to laminating various roll materials, such as plastic film, paper, and aluminum foil, etc, in two-layer or multi-layer manner. 1. First unwinder, second unwinder and rewinder all adopt air-expansion shaft.
2. First unwinder is equipped with photoelectric correction device. 3. The
tension of first unwinder, second unwinder and rewinder is respectively controlled by its own magnetic powder
clutch.4. Glue spreading by mesh roller; scraper imported from Switzerland;
the scraper will oscillate when glue spreading.5. Main motor adopts frequency conversion adjusting speed,
Panasonic frequency converter.6. The inner of laminating hot-roller is
heated by heat-conducting oil, uniform temperature and energy saving. 7. Glue spreading pressure roller and laminating pressure roller adopt pneumatic press-adding machanism, whose pressure can be
regulated.8. The total length of oven is 7.5m. The inner guiding rollers are
shaped in arch, driven by chain initiatively. 9. The oven is heated by electricity; it is devided into three sections of independent temperature control; the temperature in every section can be regulated
independently.
19
因篇幅问题不能全部显示，请点此查看更多更全内容